Extending the cylinder
1
1
Hexagon nut
The machine is supplied with the cylinder in the retracted position.
Before starting work, the cylinder must be extended and fixed.
When extending and retracting the cylinder, make sure the hydraulic hoses are not
trapped!
▪ Press the control levers downwards.
– The cylinder rises until it lies against the cylinder support plate.
▪ Tighten the two hexagon nuts of the cylinder.
– The two hexagon nuts are fixed on the right hand side of the shut-off flap with a wing
nut for safekeeping.
▪ Press the control levers upwards. The splitting blade retracts.
Log splitting can now be carried out.
Height in working position: 260 cm
The splitting procedure with "Fixomatic"
Only one person may operate the machine at a time.
Ensure that no other people are in the vicinity of the machine.
Do not reach under the splitting tool; always grasp the log from the side.
5.2
5.3
Operation
19
