Posch HydroCombi 18 GS, Operating Instructions Manual

Page: 11 / 40

General
Scope
This user manual applies to the following machines:
Machine type
Article no. * Designation - Type Drive
M6190M HydroCombi 18 GS - PS Tractor hydraulics
M6192M HydroCombi 18 GS - PZG PTO
M6194M HydroCombi 18 GS - E5.5 Electric motor
M6196M HydroCombi 18 GS - PZGE5.5 PTO/Electric motor
M6198M HydroCombi 18 GS - PZ Shaft-mounted pump
*The article number is stamped on the machine's rating plate.
Models
.....M “Fixomatic” (two-part splitting knife with timber holder function)
.....R "Autospeed"
Additional equipment
F0003048 Push-on floor grate
F0002179 Hour counter for machines with electric motor
F0001806 Hour counter for machines with PTO drive
Description
The HydroCombi 18 GS machine is suitable solely for splitting logs with a maximum length
of 15 - 110 cm.
The splitter is driven hydraulically; the hydraulic system is driven by the tractor's hydraulic
system or by an electric motor or by a PTO shaft.
The machine is operated via a two-hand safety controller.
As soon as the control levers of the safety circuit have been pressed down simultaneously,
the splitting knife is advanced.
As soon as you release one of the two control levers, the splitting knife halts. If the control
levers are pushed upwards, the splitting knife returns to its starting position.
The wood is placed on a pressure plate under the splitting knife.
The splitting knife presses into the log when working and splits it.
3
3.1
3.2
General
11