Driven by tractor with shaft-mounted pump (type
PZ)
▪ Assemble the machine on the three-point linkage of the tractor.
▪ Attach the transmission to the tractor PTO shaft and secure with the chain to prevent
twisting.
– The chain must not be more than 30° to the vertical.
– The transmission must not lean more than 45° from the vertical, otherwise oil may
escape from the ventilation screw.
▪ Clockwise rotation of the tractor PTO shaft.
▪ Turn the tractor's manual throttle to minimum.
▪ Slowly engage the tractor PTO shaft and allow the machine to start moving.
Set the required PTO shaft speed using the manual throttle: 300-380 rpm
In this work area, operation of the tractor is efficient thanks to lower fuel consumption and
noise pollution.
For a short-term increase in efficiency up to a maximum of 4 hours of continuous operation,
the machine can be operated with a PTO shaft speed of 450 rpm to achieve the maximum
splitting speed.
The maximum PTO shaft speed of 450 rpm must on no account be exceeded, otherwise
the oil will become too hot. This leads to premature wear and leaks in the pump, cylinder
and hydraulic pipes.
Before disengaging the universal joint shaft, set the manual throttle of the tractor to
minimum.
4.4
Start-up
17
