Troubleshooting
WADE-8021 User’s Manual
5-1
Chapter 5
Troubleshooting
This chapter provides a few useful tips to quickly get WADE-8021 running with
success. As basic hardware installation has been addressed in Chapter 2, this chapter
will primarily focus on system integration issues, in terms of BIOS setting, and OS
diagnostics.
5.1
Hardware Quick Installation
ATX Power Setting
Unlike other Single board computer, WADE-8021 supports ATX only. Therefore,
there is no other setting that really needs to be set up. However, there are only two
connectors that must be connected—J23 (20 pins ATX Power Connector) and J10(4
pins) in the WADE-8021.
Serial ATA
Unlike IDE bus, each Serial ATA channel can only connect to one SATA hard disk at a
time;
The installation of Serial ATA is simpler and easier than IDE, because SATA hard
disk doesn’t require setting up Master and Slave, which can reduce mistake of
hardware installation.
The WADE-8021 can support two SATA interface (SATAII, 3.0Gb/s).
