manualshive.com logo in svg

Portwell WADE-8021, User Manual, Page: 44 / 62

Share
Download
Portwell WADE-8021 User Manual Download Page 44

BIOS Setup Information 

WADE-8021 User’s Manual                                                                                                                                 

   

4-13

 

Aperture Size 

Select the Aperture Size. 
Choices: 128MB, 

★

256MB, 512MB. 

 

DVMT Pre-Allocated  

Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the 
Internal Graphics Device. 
Choices: 32M, 

★

64M, 96M, 128M, 160M, 192M, 224M, 256M, 288M, 320M, 352M, 

384M, 416M, 448M, 480M, 512M, 1024M. 
 

DVMT Total Gfx Mem 

Select DVMT 5.0 Total Graphic Memory size used by the Internal Graphic device. 
Choices: 128M, 

★

256M, MAX. 

 

1st Boot Display 

Select the Video Device which will be activated during POST. This has no effect if 
external graphics present. 
Secondary boot display will appear based on your selection. 
Choices: VBIOS Default, CRT, DVI, LVDS, 

★

CRT+LVDS. 

 

LCD Panel Type 

Select LCD panel used by Internal Graphics Device by selecting the appropriate 
setup item. 
Choices: 

★

800x480, 800x600, 1024x768, 1280x1024. 

 

Panel Color Depth 

Select the LFP Panel Color Depth 
Choices: 

★

18 Bit, 24 bit. 

Summary of Contents for WADE-8021































































Reviews:

No comments