System Installation
WADE-8021 User’s Manual
3-2
Removing CPU
1) Unlock the cooling fan first.
2) Unlock the latch of CPU Socket to open position.
3) Carefully lifts up the existing CPU to remove it from the actuator.
4) Follow the steps of installing a CPU to change to another one or drive latch to close
the opened actuator.
WADE-8021 will support the CPU of Intel 32nm Core 2 Duo & Celeron Processor for
Mobile can be detected automatically .
For Example:
Intel® Core(TM) i7-2710QE (6M Cache, 2.10GHz, Max TDP 45W)
Intel® Core(TM) i5-2510E (3M Cache, 2.50GHz, Max TDP 35W)
3.2
Main Memory
WADE-8021 provide 2 x 204-pin SO-DIMM sockets which supports DDR3 1066/1333
MHz as main memory, Non-ECC (Error Checking and Correcting), non-register
functions. The maximum memory size can be up to 8GB capacity.
For system compatibility and stability, do not use memory module without brand.
Memory configuration can be either one double-sided DIMM in either one DIMM
socket or two single-sides SO-DIMM in both sockets.
Watch out the contact and lock integrity of memory module with socket, it will
impact on the system reliability. Follow normal procedures to install memory module
into memory socket. Before locking, make sure that all modules have been fully
inserted into the card slots.
