System Installation
WADE-8021 User’s Manual
3-1
Chapter 3
System Installation
This chapter provides instructions to set up your system. The additional information
is enclosed to help you handle Watch Dog Timer (WDT) with operation of GPIO in
software programming.
3.1 Intel
®
Socket P 32 nm (988 Pin) Processor
Installing Intel Socket P CPU on actuator (for 32nm 988 Pin Processor)
1) Make sure to loosen the latch of actuator at correctly position (Open).
2) Align the processor pins with pinholes on the socket. Make sure that the notched
corner or dot mark (pin 1) of the CPU corresponds to the socket’s bevel end. Then
press the CPU gently until it fits into place. If this operation is not easy or smooth,
don’t do it forcibly. You need to check and rebuild the CPU pin uniformly.
3) Turn the latch of actuator to lock processor chip into the socket once CPU fits.
