manualshive.com logo in svg

Portwell WADE-8021, User Manual, Page: 55 / 62

Share
Download
Portwell WADE-8021 User Manual Download Page 55

BIOS Setup Information 

WADE-8021 User’s Manual                                                                                                                                 

   

4-24

 

Fast Boot 

Enables or disables boot with initialization of a minimal set of devices required to 
launch active boot option. Has no effect for BBS boot options. 
Choices: 

★

Disabled, Enabled. 

 

GateA20 Active 

UPON REQUEST – GA20 can be disabled using BIOS services. ALWAYS – do not 
allow disabling GA20; this option is useful when any RT code is executed above 
1MB. 
Choices: 

★

Upon Request, Always. 

 

Option ROM Messages 

Set display mode for Option ROM. 
Choices: 

★

Force BIOS, Keep Current. 

 

INT19 Trap Response 

BIOS reaction on INT19 trapping by Option ROM: IMMEDIATE – execute the 
trap right away; POSTPONED – execute the trap during legacy boot. 
Choices: 

★

Immediate, Postponed. 

 

1st Boot 

Set Boot Priority. 
Choices: 

★

CD/DVD, Hard Disk, USB Floppy, USB CD/DVD, USB Hard Disk, 

USB KEY, Network, Disabled. 
 

2nd Boot 

Set Boot Priority. 
Choices: CD/DVD, 

★

Hard Disk, USB Floppy, USB CD/DVD, USB Hard Disk, 

USB KEY, Network, Disabled. 
 

3rd Boot 

Set Boot Priority. 
Choices: CD/DVD, Hard Disk, 

★

USB Floppy, USB CD/DVD, USB Hard Disk, 

USB KEY, Network, Disabled. 
 

4th Boot 

Set Boot Priority. 
Choices: CD/DVD, Hard Disk, USB Floppy, 

★

USB CD/DVD, USB Hard Disk, 

USB KEY, Network, Disabled. 

Summary of Contents for WADE-8021































































Reviews:

No comments