System Installation
WADE-8021 User’s Manual
3-3
3.3
Installing the Single Board Computer
To install your WADE-8021 into standard chassis or proprietary environment, please
perform the following:
Step 1 : Check all jumpers setting on proper position
Step 2 : Install and configure CPU and memory module on right position
Step 3 : Place WADE-8021 into the dedicated position in the system
Step 4 : Attach cables to existing peripheral devices and secure it
WARNING
Please ensure that WADE-8021 is properly inserted and fixed by mechanism.
Note:
Please refer to section 3.3.1 to 3.3.5 to install INF/VGA/LAN/Audio /iAMT drivers.
3.3.1
Chipset Component Driver
WADE-8021 uses state-of-art Intel® QM67 chipset .It’s a new chipset that some old
operating systems might not be able to recognize. To overcome this compatibility
issue, for Windows Operating Systems such as Windows 2000/XP, please install its
INF before any of other Drivers are installed. You can find very easily this chipset
component driver in WADE-8021 CD-title.
3.3.2
Intel Integrated Graphics GMCH Chip
WADE-8021 has integrated HD Graphic derived from Intel® Core(TM) series CPU
(i5/i7) technology. It is the most advanced design to gain an outstanding graphic
performance. Shared 128 accompany it to 256MB system DDR3-SDRAM with Total
Graphics Memory. WADE-8021 supports VGA, DVI and LVDS .
With no additional video adaptor, this onboard video will usually be the system
display output. By adjusting the BIOS setting to disable on-board VGA, an add-on
PCI Express by 16, VGA Card can take over the system display.
Driver Support
Please find QM67 GMCH driver in the WADE-8021 CD-title. Drivers support
Windows 2000/XP
3.3.3 Intel Gigabit Ethernet Controller
Drivers Support
Please find Intel 82574L & 82579LM LAN driver in /Ethernet directory of
WADE-8021 CD-title. The drivers support Windows 2000/XP
