BIOS Setup Information
ROBO-8777VG2A User’s Manual
4-15
Parallel Port Mode
There are four different modes for the onboard parallel port :
SPP
Switch to SPP mode
EPP
Switch to EPP mode
ECP
Switch to ECP mode
ECP + EPP
Switch to ECP + EPP mode
EPP Mode Select
Select different version of EPP mode.
The choice: EPP1.7, EPP1.9. (Default EPP1.7)
ECP Mode Use DMA
Select a proper DMA channel for ECP mode.
The choice: 3, 1. (Default 3)
Watch Dog Timer Select
The choice: Disabled, 10, 20, 30, 40 sec, & 1, 2, 3, 4 Min.
Phoenix- AwardBIOS CMOS Setup Utility
USB Device Setting
Item Help
USB 1.0 Controller
[Enabled]
USB 2.0 Controller
[Enabled]
USB Operation Mode
[High Speed]
USB Keyboard Function
[Enabled]
USB Mouse Function
[Enabled]
USB Storage function
[Enabled]
*** USB Mass Storage Device Boot Setting ***
Menu Level
f
↑↓→←
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
USB 1.0/2.0 Controller
This entry is for disable/enable EHCI controller only. This BIOS itself may/may
not have high speed USB support built in, the support will be automatically turn on
when high speed device were attached.
The choice: Enabled, Disabled.
