BIOS Setup Information
ROBO-8777VG2A User’s Manual
4-1
Chapter 4
BIOS Setup Information
ROBO-8777VG2A is equipped with the AWARD BIOS stored in Flash ROM. This
BIOS has a built-in Setup program that allows users to modify the basic system
configuration easily. This type of information is stored in CMOS RAM so that it is
retained during power-off periods. When system is turned on, ROBO-8777VG2A
series communicates with peripheral devices and check its hardware resources
against the configuration information stored in the CMOS memory. If any error is
detected, or the CMOS parameters need to be initially defined, the diagnostic
program will prompt the user to enter the SETUP program. Some errors are
significant enough to abort the start-up.
4.1 Entering
Setup
Turn on or reboot the computer. When the message “Hit <DEL> if you want to run
SETUP” appears, press <Del> key immediately to enter BIOS setup program.
If the message disappears before you respond, but you still wish to enter Setup,
please restart the system to try “COLD START” again by turning it OFF and then
ON, or touch the "RESET" button. You may also restart from “WARM START” by
pressing <Ctrl>, <Alt>, and <Delete> keys simultaneously. If you do not press
the keys at the right time and the system will not boot, an error message will be
displayed and you will again be asked to,
Press <F1> to Run SETUP or Resume
In HIFLEX BIOS setup, you can use the keyboard to choose among options or
modify the system parameters to match the options with your system. The table
below will show you all of keystroke functions in BIOS setup.
General Help
↑↓→
←
: Move
Enter :
Select
+ / - /PU /PD : Value
ESC :
Exit
F1
: General Help
F2
: Item Help
F5
: Previous Values
F6
: Fail-Safe Defaults
F7
: Optimized Defaults
F9
: Menu in BIOS
F10 :
Save
