Porsche 911 GT3 Cup 2018, Techical Manual

Page: 118 / 477

Version: 4/20/2018
117
Powertrain
911 GT3 Cup (991 II)
MY 2018
Put on the cutted gear housing and fix it in place with 4 nuts (Figure 2.9.5.5)
Tightening the pinion shaft nut:
The counter torque wrench no. 27 touches the cutted
gear housing and thus fixes the pinion shaft in place.
(Figure 2.9.5.5)
Tightening instructions:
Use tool no. 20 (Figure 2.9.5.4)
Pre-tightening: 30 Nm (22 ft-lb) + 60
°
angle of rotation
Loosening
Final tightening: 30 Nm (22 ft-lb) + 60
°
angle of rotation
Tighten the pinion shaft retaining frame with 11 nuts using a crisscross pattern
Torque: 33 Nm (24.3 ft-lb)
Adhesive: Loctite 243
The four-point bearing is now centered.
2.9.5.5
2.9.5.4
Information