Porsche 911 2020, Owner'S Manual

Page: 110 / 360

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Cruise control
108
The options menu for the driver assistance sys-
tems appears on the instrument cluster.
2. If cruise control is not already selected, select CC
using the rotary push button on the steering
wheel and press to confirm.
Cruise control is switched on and passive .
The operating status appears gray in the status
display. There is no speed stored.
Switching from an already activated driver assis-
tance system to cruise control
b b
Vehicles with button S on the control lever.
1. Press button S on the control lever.
The options menu for the driver assistance sys-
tems appears on the instrument cluster.
2. Select CC using the rotary push button on the
steering wheel and press to confirm.
Cruise control is switched on and passive .
The operating status appears gray in the status
display. There is no speed stored.
Information
An activated driver assistance system will be acti-
vated again even after switching the ignition off and
on again.
Switching off cruise control
e
Press button R on the control lever.
The memory is cleared and the readiness symbol
disappears.
Activating cruise control
b b Cruise control switched on.
b b Speed is higher than 20 mph (30 km/h).
1. Accelerate to the desired speed using the accel-
erator pedal.
2. Briefly press the control lever forward (position
1 ) and release the accelerator pedal.
Cruise control is active .
The current driving speed appears green in the
status display and is maintained automatically.
Changing the desired speed
The desired speed can be increased or decreased by
pressing the control lever.
b b Cruise control active.
Increasing the speed
e Press the control lever forward (position 1 ):
– Brief press = 1 mph (1 km/h) increments
– Press and hold = 6 mph (10 km/h)
increments
Reducing the speed
e
Pull the control lever (position 2 ):
– Brief pull = 1 mph (1 km/h) increments
– Pull and hold = 6 mph (10 km/h) increments
The new desired speed is displayed on the instru-
ment cluster.
Information
The speed can be increased using the accelerator
pedal. This does not change the stored value. The
stored value is set again when you take your foot off
the accelerator pedal.
Interrupt cruise control operation
– CANCEL
Following deactivation, cruise control switches to
standby mode and remains in standby until it is ac-
tivated manually again.
e Press the control lever down (position 4 ,
CANCEL ).
– or –
e
Press the brake pedal
– or –
e Press the clutch pedal for longer than approx.
7 seconds (vehicles with manual transmission).
– or –
e Move selector lever to operating mode N (ve-
hicles with PDK).
Cruise control is passive. The set value for the
desired speed remains stored. The status display
changes from green to gray.
Cruise control operation is interrupted auto-
matically in the following situations:
– The vehicle speed is above or below the set
speed for a certain time.
– Porsche Stability Management (PSM) is in con-
trol mode.
Resuming the stored speed –
RESUME
e Press the control lever up (position 3 , RESUME ).
Cruise control accelerates or brakes the vehicle
to the stored speed.