background image

4

  

Introduction

Please read all the manual chapters in order to fully utilise all the functions of a multi-person Genesis SPA 

bathtub.

Please remember, that even though hydromassage is therapeutic and relaxing, people who are seriously ill 

or suffering from heart conditions or severe hypertension have to take into account special conditions that are 

present in Spa and consult with a physician before starting to use the device.

It is recommended to use hydromassage in water of average temperature of 37

0

C, for approx. 20 minutes.

It is recommended that children using the device are always accompanied by an adult.

This equipment is not intended to be used by people (including children) with impaired physical, sensory 

or mental capacity, or people who do not have experience or knowledge of the equipment, unless it takes 

place under the supervision or according to the equipment operation manual, transferred by people who are 

responsible for their safety.

Mind that children must never play with this appliance.

Before starting a bath, ensure that the water level in the bath is correct. If the water level is approx. 

3-4 below the middle of the skimmer filter, the bath can be started. If the water level in the bathtub 

is  incorrect,  the  filtration  system  will  not  work  properly.  Heating  water  in  the  bathtub  will  not  be 

possible. Please remember to periodically drain water from the filter.

Parts that include active parts, except for parts powered by very low safe voltage that does not exceed 12 V, 

must be inaccessible for the person present in the appliance.

Parts that include electric components, except for remote control devices, must be placed or fastened in a 

way that prevents their falling into the bath device.

This manual should be retained for further use.

Summary of Contents for GENESIS SPA 213 x 213













































Reviews: