18
1.5.15. SYSTEM-RELATED MESSAGES
Program memory failure* – M022
At Power-Up, the system has failed the Program Checksum Test. This indicates a problem with the firmware
(operation program) and requires a service call.
The settings have been reset (Persistent Memory Error)* – M021
Contact your dealer or service organization if this message appears on more than one power-up.
The clock has failed* – M020
Contact your dealer or service organization.
Configuration error (SPA will not Start Up)
Contact your dealer or service organization.
A pump may be stuck on – M034
Water may be overheated. POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer
or service organization.
Hot fault – M035
A Pump Appears to have been Stuck ON when spa was last powered
POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or service organization.
M0XX numbers are Message Codes.
* This message can be reset from the topside panel.
1.5.16. REMINDER MESSAGES
General maintenance helps.
Reminder Messages can be suppressed by using the Preferences Menu.
Reminder Messages can be chosen individually by the Manufacturer. They may be disabled entirely, or there
may be a limited number of reminders on a specific model. The frequency of each reminder (i.e. 7 days) can
be specified by the Manufacturer.
Check the pH
May appear on a regular schedule, i.e. every 7 days.
Check pH with a test kit and adjust pH with the appropriate chemicals.
Check the sanitizer
May appear on a regular schedule, i.e. every 7 days.
Check sanitizer level and other water chemistry with a test kit and adjust with the appropriate chemicals.
Clean the filter
May appear on a regular schedule, i.e. every 30 days.
Clean the filter media as instructed by the manufacturer.
Change the water
May appear on a regular schedule, i.e. every 90 days.
Change the water in the spa on regular basis to maintain proper chemical balance and sanitary conditions.
Clean the cover
May appear on a regular schedule, i.e. every 180 days.
Vinyl covers should be cleaned and conditioned for maximum life.
Treat the wood
May appear on a regular schedule, i.e. every 180 days.
Wood skirting and furniture should be cleaned and conditioned per the manufacturers instructions for
maximum life.
