14
Time of Day
Back
12
: 00 PM
12 HR
Cancel
Save
10:
05
PM
12 HR
Note:
If power is interrupted to the system, Time-of-Day will be maintained for several days.
1.5.7. ADJUSTING FILTRATION
Main Filtration
Using the same navigation and adjustment as Setting the Time, Filter Cycles are set using a start time and
a duration. Each setting can be adjusted in 15-minute increments. The panel calculates the end time and
displays it automatically.
Filter Cycles
Back
Filter Cycle 1
Starts at 12:00 AM
Runs 0 HR 0 Min
Ends at 12:00 AM
Filter Cycle 2 NO
Starts at 12:00 AM
Runs 0 HR 0 Min
Ends at 12:00 AM
Filter Cycles
Back
Filter Cycle 1
Starts at
6:15
AM
Runs
3
HR 0 Min
Ends at 9:15 AM
Filter Cycle 2 NO
Starts at 12:00 AM
Runs 0 HR 0 Min
Ends at 12:00 AM
Cancel
Save
Filter Cycle 2 - Optional Filtration
Filter Cycle 2 is OFF by default.
Simply navigate to the Filter Cycle 2 line by pressing the Right Navigation Button, and when “NO” is highlight-
ed, press Up or Down to toggle Filter Cycle 2 on and off. When Filter Cycle 2 is ON, it can be adjusted in the
same manner as Filter Cycle 1 by navigating to the right.
It is possible to overlap Filter Cycle 1 and Filter Cycle 2, which will shorten overall filtration by the overlap
amount.
Invert Panel
Selecting Invert Panel will flip the display and the buttons so the panel can be easily operated from inside or
outside the hot tub.
1.5.8. RESTRICTING OPERATION
The control can be restricted to prevent unwanted use or temperature adjustments.
Locking the Panel prevents the controller from being used, but all automatic functions are still active.
Locking the Settings allows Jets and other features to be used, but the Set Temperature and other pro-
grammed settings cannot be adjusted.
Settings Lock allows access to a reduced selection of menu items. These include Set Temperature, Invert,
Lock, Utilities, Information and Fault Log. They can be seen, but not changed or edited.
