PoolRite innoSphere 630, Owner'S Manual

Page: 10 / 16

RECIRCULATE
With innoValve set in RECIRCULATE position the pool or spa water is recirculated via the pump without passing
through the filter. This can be useful to provide extra flow for boosting spa jets or added circulation for heating.
VALVE CLOSED
The pump must always be switched OFF when
innoValve is in the CLOSED position. This setting
is used to prevent the filter contents draining back
through the pump when the lid is removed to enable
cleaning of the strainer basket.
Ensure innoValve is in the FILTER position before
restarting the pump.
PRESSURE RELIEF VALVE
Designed as a safety feature to release water from
the system, reducing the risk of hydrogen gas build
up in the cell. This device also relieves water hammer
in the system on pump stop reducing fatigue damage
to the plumbing system over time.
This feature will only correctly work in pool systems where the unit is installed above water level.
9