Filter Pressure Build
Up Rapidly
• Check eyeballs in pool are open.
• Check for algae in pool.
• Vacuum cleaning has been done with valve in backwash
position.
• Ineffective backwashing due to poor water flow.
Check for restrictions from blocked strainer baskets
or air leaks in pump or suction plumbing. Check that
automatic pool cleaner has not been left connected to
skimmer during backwashing.
• Check for algae inside filter.
Air Bubbles Back to Pool
• Check sufficient water flow.
• Check suction pipe connectors are tight.
• Check pump lid seal is clean, lubricated with silicone
grease and correctly fitted and tightened.
Water Drains Back to Pool
when Pump Switched Off
• Check pump lid for leaks.
• Check SMARTVALVE for leaks.
• Check backnuts are tight on all pipe connectors.
Pump Loses Suction
• Check strainer baskets in pump and Power skimmer
box are not blocked with debris.
NOTE
: After opening the pump strainer pot lid air will
have entered the filtration system. Re-priming
the pump may be necessary when the system is
started again.
• Check filter condition from pressure gauge and
backwash if necessary.
Algae/Milky Coloured Water
• Contact your pool builder or local pool shop for advice
on chemical balancing the water, as damage to the
filtration equipment or pool surface may result if not
corrected.
Dimple in filter barrier
• Check valve is open/clear.
TROUBLE SHOOTING
10
Summary of Contents for innoSphere 630
Page 1: ...OWNERS MANUAL...
Page 15: ...14...