POM2-3333
Merger Unit Test User
Manual
32
3.5.3.4 Test result
When the result keeps stable, press
and the data will be uploaded to the
report.
3.5.3.5 Test completed
When the accuracy test has been completed, press “ESC” in the software or
on the
tester or “ESC” on the external PC to stop the test.
If there are new test items to be tested (The wiring connection is the same), the previous
steps can be omitted, only need to switch
Testing data observation
. If there are new test
items to be added, press
after the new testing page is switched.
Note: After above test, the button
will turn grey. If this test result is not
satisfied to have a test again, press button
after the software is
stopping. Then the button
will be available. Press this button again to
restart the test and obtain the result.
3.5.3.6 Report
When all test items are finished, or the selected items are completed, press
to get
the word format report.
3.5.4 Notice
The analysis on control block cannot be analyzed until the GOOSE block is detected. The
data for unselected blocks are all 0.
3.5.5 Sample report
Frame
Rate
Total received message
59
100%
No. of displacement
0
0.000%
TEST No. of displacement
0
0.000%
Sq drop
2
3.390%
Sq repeat
0
0.000%
St drop
0
0.000%
St repeat
0
0.000%
SN error
0
0.000%
Invalid survival time
0
0.000%
recovery time with
communications timeout
0
0.000%
recovery time with
communications interruption
2
3.390%
