POM2-3333
Merger Unit Test User
Manual
23
3.2.3.4 Test result
When the accuracy result keeps stable, press
and the data will be
uploaded to the report.
3.2.3.5 Test completed
After test, if there is no item to be tested, press “ESC” in the software or
on the
tester or “ESC” on the external PC to stop the test.
If there are new test items to be tested (The wiring connection is the same), the previous
steps can be omitted, only need to switch
Testing data observation
. If there are new test
items to be added, press
after the new testing page is switched.
Note: After above test, the button
will turn grey. If this test result is not
satisfied to have a test again, press button
after the software is
stopping. Then the button
will be available. Press this button again to
restart the test and obtain the result.
3.2.3.6 Report
When all test items are finished, or the selected items are completed, press
to get
the word format report.
3.2.4 Sample report
Absolute delay
Setting
Max. value
Min. Value
Avg.
1.9uS
1.9uS
1.9uS
