Pompa ad Ingranaggi - Serie MX
Gear Pump - MX Series
29
1.
GENERAL INFORMATION
1.1
SUPPLY CONDITIONS
According to Customer’s requirements, the pump can be provided both as bare shaft pump
and as pump unit. By pump unit it is meant the pump aligned with the engine, including driv-
ing elements, baseplate and any auxiliary machinery. The pumping group is supplied with
safety coupling guard.
1.2
MANUFACTURER
The pump Manufacturer is POMPE CUCCHI S.R.L.. You can apply for assistance by send-
ing a request to the following address:
Via dei Pioppi 39 - 20090 OPERA (MI) ITALY
Tel. +39.02.57.60.62.87 (Hunting Line)
Fax +39.02.57.60.22.57
E-mail : [email protected]
1.3
USER MANUAL CONTENT
This user manual provides all the necessary information to ensure a safe and correct use of
the machine. It was written
–
when applicable
–
according to point 6.5 of Standard EN ISO
12100-2:2003
–
Safety of machinery; according to point 7 of Standard UNI EN 809-2000
Pumps and Pump Units for Liquids - Common Safety Requirements - and according to point
1.7.4 of Directive 2006/42/EC. In this manual it is constantly referred to safety instructions.
Such instructions are identified by the following symbols:
It represents the safety instructions contained in this manual,
whose non-observance may compromise safety.
It is shown when electrical safety is essential to worker protection.
It indicates the safety instructions which should be taken into ac-
count for the safe operation of either the pump, the pump unit or the
pump or pump unit protection.