FS3-3 Assembly July 2016
Page 5 of 16
GENERAL OVERVIEW
•
These instructions are for restrooms shipped unassembled. Please retain these instructions for maintenance and repair purposes.
•The
FS3-3 Model
restroom assembly will require two people.
•All references to left, right, front and rear are as viewed from the front of the restroom.
•Review the entire instruction manual prior to assembly.
•Please follow the instructions in the order they are presented.
•When using air operated screw drivers or impact wrenches, be sure that the torque setting does not exceed 28 inch pounds.
Also, when using a battery-operated drill, set it to the lowest torque setting.
•We strongly suggest that these restrooms, as with all portable structures, be transported and handled with care. Dropping the
restroom when loading and unloading could cause damage to the door jamb and other components.
~~TOOLS REQUIRED FOR ASSEMBLY!~~
• Rivet Gun
• Standard Slotted Screwdriver
• Phillips Crosshead Screwdriver
• Vise-Grips
• Pliers
• (2) Tapered Awls
• Drill with a 13/64” Drill Bit
• Socket Wrench with a 7/16” socket
FULL SCALE FASTENER DRAWINGS
(14) PC-000192 Sems
(4) PC-000140 Lock Nut
(4) PC-000123 - Washer
(4) PC-000121 - Washer
(1) PC-000117 - Rivet
(31) PC-000106 - Washer
(42) PC-000104 - Rivet
(8) PC-000100 - Rivet
(2) PC-000101 - Rivet
(9) PC-000102 - Rivet
(4) PC-000367 - Nylon
Push-In Fastener
(6) PC-000231
10-32 x 1-1/2” Screw
(2) PC-000159 - Screw
(5) PC-000158
1-1/2” Phillips Self
Tapping Screw
(6) PC-000103 - Rivet
(2) PC-000147
3/4” Phillips Self
Tapping Screw
(2) PC-000175 Screw
