Polycom VSX 7000s Series, Integrator'S Reference Manual

Page: 49 / 418

Cables
2 - 17
PowerCam Break-Out Cable
This cable connects S-Video and control cables and a power supply to a
Polycom PowerCam camera. This combination is required when using the
PowerCam as either the primary or the secondary camera when the camera is
more than 10 ft away from the system.
Description Used With Part Number Length
8-pin mini-DIN to 3-way breakout
block VSX 7000 or VSX 7000s (use with
S-Video cable on page
2-9 and
control cable 2457-21713-00x on
page
2-21 )
VSX 7000e or VSX 8000 (use with
S-Video cable on page
2-9 , control
cable 1457-50527-001 on page
2-18 for a primary camera, and
control cable 2457-10029-001 on
page
2-18 for a secondary
camera)
Separate power supply required
(part number 1465-52621-036)
1457-50526-001 Shipped Length: 6 ft
(1.8 m)
Drawings and part numbers are provided for reference only. Polycom claims no responsibility
or liability for the quality, performance, or reliability of cables based on these reference
drawings, other than cables provided by Polycom. Contact your Polycom distributor or
Polycom Custom/Vertical Products to order cables that meet the appropriate manufacturing
tolerances, quality, and performance parameters for your application.
6' ± 2.0"
4 Pin
Mini Din
Female
8 Pin
Mini Din
Female
DC
Jack
Molded PVC strain relief
P2
1
2
5 4 3
6 7 8
1
3 4
2
J1
P1 J2
8 Pin Mini Din
Male