System Commands
4 - 187
numdigitsdid
Sets or gets the number of digits in the DID Gateway number (E.164 dialing).
Syntax
numdigitsdid <get|{0..24}>
Feedback Examples
numdigitsdid 7
Comments
The number of digits in the DID is that portion of the full DID that the Gateway
will be given from the ISDN service provider as the Called Party Line
Identifier. This, in turn, will be passed to the Gatekeeper for address
resolution.
User interface screen location:
System > Admin Settings > Network > IP >
H.323 Settings
(page 3)
: Number of Digits in DID Number
For this option to be available, the Gateway Number Type on the same page
must be set to Direct Inward Dial.
Parameter
Description
get
Returns the current setting.
{0..24}
Specifies the number of digits in DID numbers.
Summary of Contents for VSX 7000s Series
