![background image](http://html1.mh-extra.com/html/polycom/vsx-7000s-series/vsx-7000s-series_integrators-reference-manual_1576449226.webp)
Integrator’s Reference Manual for the VSX Series
4 - 150
isdnswitch
Sets or gets the ISDN switch protocol. This command is only applicable if you
have an ISDN network interface connected to your system.
Syntax
isdnswitch get
isdnswitch <pt-to-pt_at&t_5_ess|multipoint_at&t_5_ess|ni-1>
isdnswitch <nortel_dms-100|standard_etsi_euro-isdn|ts-031|ntt_ins-64>
Feedback Examples
•
isdnswitch pt-to-pt_at&t_5_ess
•
isdnswitch multipoint_at&t_5_ess
•
isdnswitch ni-1
•
isdnswitch nortel_dms-100
•
isdnswitch standard_etsi_euro-isdn
•
isdnswitch ts-031
•
isdnswitch ntt_ins-64
Comments
If more than one switch protocol is supported, you must find out from your
telephone service provider which protocol to select. If you change the country
settings, a new set of ISDN switch protocols is loaded.
User interface screen location:
System > Admin Settings > Network > ISDN:
ISDN Switch Protocols
Parameter
Description
get
Returns the current switch protocol.
pt-to-pt_at&t_5_ess|
multipoint_at&t_5_ess|
ni-1|nortel_dms-100|
standard_etsi_euro-isdn
|ts-031|ntt_ins-64
Specifies the ISDN switch protocol to use.
Summary of Contents for VSX 7000s Series
