Polycom VSX 7000s Series, Integrator'S Reference Manual

Page: 275 / 418

System Commands
4 - 199
prichannel
Sets or gets the PRI channels that will be active for the PRI line. This command
is only applicable if you have a PRI network interface connected to your
system.
Syntax
prichannel get all
prichannel get {1..n}
prichannel set all
prichannel set {1..n} <on|off>
Feedback Examples
• prichannel 1 on
• prichannel 23 off
Comments
User interface screen location: System > Admin Settings > Network > ISDN
(page 5) : Active Channels
This screen is only accessible if you have a PRI network interface connected to
your system.
Important PRI Channel Information
Outgoing Call. For an outgoing call, the VSX system uses the first active and
available channel starting with the lowest number from the channel range
(1-23 for a PRI T1 and 1-30 for a PRI E1). If an additional channel is needed, the
system chooses the next incremental number. For example, if channels 1
through 7 are inactive, but 8 is active and available, then 8 is the first channel
that can be used by the VSX system to place an outgoing call. If an additional
channel is needed, the system will use the next available active channel in the
range (which could be 9, and so on).
Parameter Description
get
Returns the current setting. Requires a parameter from
<all|{1..n}>
.
all
Selects all PRI channels and returns all channels and
settings similar to
briallenable
.
{1..n}
Range of available PRI channels. For PRI T1, the
range is
1..23
. For PRI E1, the range is
1..30
.
set
Sets the PRI channels to be active when followed by a
parameter from
<all|{1..n}>
and from
<on|off>
.
on
Activates the selected PRI channels.
off
Disables the selected PRI channels.