Polycom VSX 7000s Series, Integrator'S Reference Manual

Page: 246 / 418

Integrator’s Reference Manual for the VSX Series
4 - 170
mpmode
Sets or gets the multipoint conference viewing mode for the system in a
multipoint call. The multipoint mode can be set to auto, discussion,
presentation, or fullscreen. By default, it is set to auto.
Syntax
mpmode <get|auto|discussion|presentation|fullscreen>
Feedback Examples
• mpmode auto
• mpmode presentation
• mpmode discussion
• mpmode fullscreen
Comments
This option is not available unless the multipoint option is enabled.
What you see during a multipoint call can depend on many factors such as the
VSX system monitor configuration, the number of sites in the call, whether
content is shared, and whether dual monitor emulation is used.
User interface screen location:
System > Admin Settings > Monitors >
Multipoint Setup: Multipoint Mode
Parameter Description
get
Returns the current setting.
auto
In Auto mode, the system switches between Full
Screen Mode and Discussion mode, depending on the
interaction between the sites. If one site is talking
uninterrupted for 15 seconds or more, the speaker
appears full screen.
presentation
In Presentation mode, the person who is speaking
appears full screen to the far sites, while the person
who is speaking sees all the other sites on a split
screen.
discussion
In Discussion mode (also called Continuous Presence
mode), every site sees all the sites in the meeting at
the same time, on a split screen.
fullscreen
In Full Screen mode, every site in the call sees the
current speaker, or the latest person to speak, on the
full screen.