Appendix
Network Connection
ViaVideo
User’s Guide
68
www.polycom.com
1.
Go to the
Quality of Service and Firewall
screen (
System
Info>Setup>H.323>QOS
).
2.
Select the
Use Fixed Ports
option.
3.
If you used the default port range when assigning the ports in
your firewall interface, you don’t need to change anything.
ViaVideo automatically enters this range. If you are using a
different range, enter the port numbers for that range here.
4.
You should have already performed your NAT configuration. if
not, see “Configure Your ViaVideo for NAT,” on page 69, and
follow the instructions listed there.
Router With Firewall, Using a DMZ
If you are using a router with a firewall, and want to place the PC
running ViaVideo outside the firewall, you need to perform the
following tasks:
•
Configure ViaVideo to work with your firewall’s Network Address
Translator
•
Assign your ViaVideo to the DMZ.
ViaVideoUG.book Page 68 Thursday, December 7, 2000 2:49 PM
Summary of Contents for ViaVideo
