Polycom ViaVideo User Manual Download Page 42

Page: 42 / 92

Chapter 3

System Information and Diagnostics

ViaVideo

User’s Guide

www.polycom.com

Each of the system information screens has a

Menu

icon in the

lower right corner that returns you to the previous screen. To return
to the

System Information

screen from anywhere in the menu

hierarchy, click the

Info

icon at the top of each screen. To return to

the main calling screen, click the

Home

icon.

Note

If you are in a call while using the system information
screens, click the

Info

icon to display the system

information screens. The far site video is displayed in a
small screen that is always on top of your desktop. You can
move this mini-screen by dragging it with your mouse.

The following diagram shows the ViaVideo screen hierarchy.

ViaVideoUG.book Page 34 Thursday, December 7, 2000 2:49 PM

Summary of Contents for ViaVideo





























































































Search results

Summary of Contents for ViaVideo

Reviews:

Related manuals for ViaVideo

Brands by name

Popular brands

Polycom ViaVideo, User Manual

Search results

Summary of Contents for ViaVideo

Reviews:

Related manuals for ViaVideo

Brands by name

Popular brands