Polycom ViaVideo User Manual Download Page 37

Page: 37 / 92

Chapter 2

Using ViaVideo

Polycom, Inc.

ViaVideo

User’s Guide

The

Audio Mixer

dialog is displayed.

Master Volume

Controls the audio level for all your PC’s sounds.

Wave Volume

Controls your PC’s sound effects volume.

Line In

Controls the volume for all audio coming from
your ViaVideo camera unit (far site audio, audio
test tone, keypad touch tones).

To mute outgoing audio when using the auto answer feature, select

Mute Auto Answer Calls

in the

Audio

screen (

System

Info>Setup>Audio

Muting Video

To mute the near video for privacy both during and in-between calls
without shutting off your ViaVideo unit, slide the ViaVideo camera
shutter to the

Video Mute

(middle) position.

Note

This does not mute the outgoing audio in your call. To mute
the audio during a call, click

Mute

on your on-screen

remote.

ViaVideoUG.book Page 29 Thursday, December 7, 2000 2:49 PM

Summary of Contents for ViaVideo





























































































Search results

Summary of Contents for ViaVideo

Reviews:

Related manuals for ViaVideo

Brands by name

Popular brands

Polycom ViaVideo, User Manual

Search results

Summary of Contents for ViaVideo

Reviews:

Related manuals for ViaVideo

Brands by name

Popular brands