13
19
Click
Next
.
20
In the
Span Definition
dialog box, define the following parameters:
Num Plan
Select the type of signaling (Number Plan) according to
information given by the service provider.
Default: ISDN
For E1 spans, this parameter is set by the system.
Net Specific
Select the appropriate service program if one is used by
your service provider (carrier).
Some service providers may have several service
programs that can be used.
Default: None
Dial-out Prefix
Enter the prefix that the PBX requires to dial out. Leave
this field blank if a dial-out prefix is not required.
The field can contain be empty (blank) or a numeric
value between
0
and
9999
.
Default: Blank
Field
Description
Framing
Select the Framing format used by the carrier for the
network interface from the list.
•
For T1 spans, default is
SFSF.
•
For E1 spans, default is
FEBE.
Side
Select the RMX side on the network.
Default: User side
If the PBX is configured on the network side, then the
RMX unit must be configured as the user side, and
vice versa, or both must be configured symmetrically.
Line Coding
Select the PRI line coding method from the list.
•
For T1 spans, default is
B8ZS.
•
For E1 spans, default is HDB3.
Field
Description
