background image

10

12

In the 

Fast Configuration

 

Wizard

 - 

SIP 

dialog box, set the following: 

13

Click the 

Next

 button.

14

Enter the required 

Security

 information in the dialog box. 

Field

Description

SIP Server

Select:

Specify 

– to manually configure SIP servers.

Off

 – if SIP servers are not present in the network.

SIP Server IP 
Address

Enter either the IP address of the preferred SIP server 
or its host name (if a DNS server is used).

Transport Type

Select the protocol that is used for signaling between 
the MCU and the SIP Server or the endpoints 
according to the protocol supported by the SIP Server:

UDP –

 Select this option to use UDP for signaling.

TCP –

 Select this option to use TCP for signaling.

TLS –

 Select this option to use the secured 

communication where the 

Signaling Host

 listens on-

secured port 5061 only. The supported security 
protocols are: TLS 1.0, SSL 2.0 and SSL 3.0.

Field

Description

SIP 
Authentication

Click this check box to enable authentication with the SIP 
server. 
Select this check box only if the authentication is enabled 
on the SIP proxy.

User 
Name

Enter the user name the RMX will use to 
authenticate itself with the SIP proxy. This 
name must be defined in the SIP proxy.

These 
fields can 
contain up 
to 
20 ASCII 
characters

Password

Enter the password the RMX will use to 
authenticate itself with the SIP proxy. This 
password must be defined in the SIP proxy.

Summary of Contents for RealPresence 4000





















Reviews: