Unpack the Equipment
3
Make sure you have all of the screws and nuts
shown in the illustration.
If you are missing any of the items shown
in step 1 and step 2, contact your Polycom
distributor or go to Polycom Support at
www.polycom.com/support.
Unpack the flat-panel display and
associated equipment, and unpack the
SMART Board interactive whiteboard and
associated equipment.
•
The flat-panel display comes with a remote
control and batteries, which you will need
later in the installation process. At this point,
simply insert the batteries into the remote
control.
•
The SMART Board interactive whiteboard
comes with the pen tray, software, the
SMART Board mounting kit, and other items
you will need later in the installation process.
For more information about these items, refer
to the documentation that you received with
the SMART Board.
2
Mounting nuts
1/4-20 x .75L flathead screws
M5 x 10 sems Phillips panhead screws
1/4-20 x 5/8 Phillips flathead screws
M3 Phillips flathead screws
Wing nuts
M8 x 20 button head cap screws
3
Summary of Contents for HDX 9002
