Setting Up the Polycom Instructor
FS
HDX
20
Set Up the PC
Set up your PC as described in the documentation
that came with the PC. You should connect the PC
to the LAN; however, do not connect the PC to a
power outlet at this point in the installation.
The PC is required to have:
•
Windows 2000 Service Pack 3
or
Windows XP
Service Pack 2
•
Two available serial ports
or
one available
serial port and an available USB port
Connect the 9-pin serial cable (that you
connected in step 8 on page 12) to the
Com 1 serial port on the PC.
Connect the VGA cable from the input port on
the VGA splitter to the VGA output port on
the PC.
1
2
3
INPUT
OUTPUT 1
OUTPUT 2
12V DC
ON
Summary of Contents for HDX 9002
