Polycom CX5500, Administrator'S Manual

Page: 130 / 386

Polycom CX5500 Unified Conference Station Administrator’s Guide
1.1.0
Polycom, Inc. 130
The following example enables a soft key in the phone’s idle state that navigates to a phone’s
administrator settings. The soft is inserted in soft key position 3, after the default soft keys. Note the
macro action string:
$FMenu$$FDialpad3$$FDialpad2$$FDialpad4$$FDialpad5$$FDialpad6$$FSoftKey1$
Enable the Power Saving Feature
CX5500 systems support a power-saving feature, which is disabled by default. This feature has a number
of options you can configure, as listed in the table
Power Saving .
You can turn on the phone’s power-
saving feature during non-working hours and working hours. If you want to turn on power-saving during
non-working hours, you can configure the power-saving feature around your work schedule. Or, if you
want to turn on the power-
saving feature while at work, you can configure the sensitivity of the phone’s
motion detection system and an idle time after which the phone enters the power-saving mode.
Power Saving
Central Provisioning Server template > parameter
Turn the power-saving feature on or off site.cfg > powerSaving.enable
Specify the amount of time before the phone screen goes idle site.cfg > powerSaving.idleTimeout.*
Set the office hour start time and duration for each day of the week
site.cfg > powerSaving.officeHours.*
Web Configuration Utility
To turn this feature on or off and configure how it works, navigate to Settings > Power Saving and expand the
panels to set the general, office hour, idle timeout, and user detection sensitivity settings.
Local Phone User Interface
To configure the Power Saving Office Hours, Timeouts, and User Detection, navigate to Settings > Basic >
Power Saving .