Polycom CX5500 Page 310 Administrator'S Manual Download

Page: 310 / 386

Polycom CX5500 Unified Conference Station Administrator’s Guide

1.1.0

Polycom, Inc.

310

Soft Key Customization Parameters

Parameter

Permitted Values

Default

softkey.feature.basicCallManagement.redundant

0 or 1

Control the display of the

Hold

Transfer

, and

Conference

soft keys. If set to 0 and the phone has hard keys

mapped for

Hold

Transfer

, and

Conference

functions (all must be mapped), none of the soft keys are

displayed. If set to 1, all of these soft keys are displayed.

softkey.feature.buddies

0 or 1

If 0, the

Buddies

soft key is not displayed. If 1, the soft key is displayed (if

pres.idleSoftKeys

is set to 1).

softkey.feature.callers

0 or 1

If 1, the

Callers

soft key displays on all platforms. If 0, the

Callers

soft key is disabled for all platforms.

The default value is 0.

softkey.feature.directories

0 or 1

If 1, the

Directory

soft key displays on all platforms. If 0, the

Directory

soft key is disabled for all platforms.

The default value is 0.

softkey.feature.endcall

0 or 1

If 0, the

End Call

soft key is not displayed. If 1, the soft key is displayed.

softkey.feature.forward

0 or 1

If 0, the

Forward

soft key is not displayed. If 1, the soft key is displayed.

softkey.feature.join

0 or 1

Join two individual calls to form a conference. If 0, the

Join

soft key is not displayed. If 1, the soft key is

displayed.

softkey.feature.mystatus

0 or 1

If 0, the

MyStatus

soft key is not displayed. If 1, the soft key is displayed (if

pres.idleSoftKeys

is set to 1).

softkey.feature.newcall

0 or 1

If 0, the

New Call

soft key is not displayed when there is an alternative way to place a call. If 1, the

New Call

soft

key is displayed.

softkey.feature.simplifiedSignIn

0 or 1

If 0, the

SignIn

soft key is not displayed. If 1 and

voIpProt.server.x.specialInterop

lync2010

, the

SignIn

soft key is displayed.

softkey.feature.split

0 or 1

Split up a conference into individual calls. If 0, the

Split

soft key is not displayed. If 1, the soft key is displayed.

softkey.x.action

macro action string, 256
characters

Null

The action or function for custom soft key x. This value uses the same macro action string syntax as an
Enhanced Feature Key. For a list of actions, see Understanding Macro Definitions.

Summary of Contents for CX5500



































































































































































































































































































































































































Search results

Summary of Contents for CX5500

Reviews:

Related manuals for CX5500

Brands by name

Popular brands

Polycom CX5500, Administrator'S Manual

Search results

Summary of Contents for CX5500

Reviews:

Related manuals for CX5500

Brands by name

Popular brands