70
Quintic Hangs Up
Typical causes:
•
Quintic post distorted
•
Quintic frame damaged
•
Counterweight
•
Quintic return spring
•
Encoder wire not seated
•
Flash on baseblock
Strobe Exposure Adjustment Failure
Typical causes:
•
Photodiode cap not seated
•
Cal wedges not seated, missing or distorted (check IC, pin 7)
•
Transducer clip broken
•
Defective flashtube
•
Defective strobe
Ambient Exposure Adjustment Failure
Typical causes:
•
Cal wedges not seated, missing or distorted
•
Photodiode cap not seated
•
Yellow dot in wrong position (do not remove any yellow dots)
•
Adjusting gear wheel not catching wedge
Summary of Contents for Spectra/Image One Board
