Polaris Sportsman Touring 570 EPS 2018 Owner'S Manual Download Page 73

Page: 73 / 176

DRIVING IN REVERSE

Follow these precautions when operating in reverse:

1. Always check for obstacles or people behind the vehicle.

2. Always avoid backing downhill.

3. Back slowly.

4. Apply the brakes

lightly

for stopping.

5. Avoid turning at sharp angles.

6. Never open the throttle suddenly.

7. Do not use the override switch unless additional wheel speed is required for

vehicle movement. Use the override with caution as rearward vehicle speed
is greatly increased. Do not operate at wide open throttle. Operate the
throttle just enough to maintain a desired speed.

NOTICE

Excessive throttle operation while in the speed limit mode may cause fuel to

build in the exhaust, resulting in engine popping and/or engine damage.

PARKING ON AN INCLINE

Avoid parking on an incline if possible. If it's unavoidable, follow these
precautions:

1. Stop the engine.

2. Place the transmission in PARK.

3. Lock the parking brake.

4. Always block the rear wheels on the downhill side.

OPERATION

Summary of Contents for Sportsman Touring 570 EPS 2018

















































































































































































Search results

Summary of Contents for Sportsman Touring 570 EPS 2018

Reviews:

Related manuals for Sportsman Touring 570 EPS 2018

Brands by name

Popular brands

Polaris Sportsman Touring 570 EPS 2018, Owner'S Manual

Search results

Summary of Contents for Sportsman Touring 570 EPS 2018

Reviews:

Related manuals for Sportsman Touring 570 EPS 2018

Brands by name

Popular brands