Polaris Sportsman Touring 570 EPS 2018 Owner'S Manual Download Page 51

Page: 51 / 176

CLOCK

1. Press and hold the MODE button to enter the Options Menu.

NOTE

“OPTIONS” will display on the screen for 3 seconds before showing first menu

item

2. Select “Clock” from the Options Menu by pressing the MODE button.

Reference the image shown above:

Press the MODE button.

Toggle the Up/Down Buttons to change the units (12H or 24H)

With the correct unit displayed, Press the mode button which will set

the unit.

Toggle the Up/Down Buttons to change the units (Cycles Hours)

With the correct unit displayed, Press the mode button which will set

the unit.

Toggle the Up/Down Buttons to change the units (Cycles 10s of

Minutes)

With the correct unit displayed, Press the mode button which will set

the unit.

Toggle the Up/Down Buttons to change the units (Cycles 1s of

Minutes)

With the correct unit displayed, Press the mode button which will set

the unit and return to the Options Menu.

FEATURES AND CONTROLS

Summary of Contents for Sportsman Touring 570 EPS 2018

















































































































































































Search results

Summary of Contents for Sportsman Touring 570 EPS 2018

Reviews:

Related manuals for Sportsman Touring 570 EPS 2018

Brands by name

Popular brands

Polaris Sportsman Touring 570 EPS 2018, Owner'S Manual

Search results

Summary of Contents for Sportsman Touring 570 EPS 2018

Reviews:

Related manuals for Sportsman Touring 570 EPS 2018

Brands by name

Popular brands