Polaris Sportsman Touring 570 EPS 2018 Owner'S Manual Download Page 71

Page: 71 / 176

DRIVING DOWNHILL

When driving downhill, follow these precautions:

1. Always move the 4X4 switch to ADC 4X4 (if equipped) before ascending or

descending a hill. Never operate in TURF mode while operating on a hill or
other irregular terrain.

2. Avoid steep hills. Maximum incline is:

• 15° (Touring/X2)
• 25° (1-up Models)

3. Always check the terrain carefully before descending a hill.

4. Always descend a hill with the transmission in forward gear. Do not descend

a hill with the transmission in neutral.

5. Slow down. Never travel down a hill at high speed.

6. Drive straight downhill. Avoid traveling down a hill at an angle, which would

cause the vehicle to lean sharply to one side.

7. Shift body weight uphill. A passenger should also shift body weight uphill.

8. Apply the brakes

slightly

to aid in slowing. Applying the brakes too firmly may

cause the rear wheels to lock, which could result in loss of control.

Touring/X2

15°

1–Up Models

25°

OPERATION

Summary of Contents for Sportsman Touring 570 EPS 2018

















































































































































































Search results

Summary of Contents for Sportsman Touring 570 EPS 2018

Reviews:

Related manuals for Sportsman Touring 570 EPS 2018

Brands by name

Popular brands

Polaris Sportsman Touring 570 EPS 2018, Owner'S Manual

Search results

Summary of Contents for Sportsman Touring 570 EPS 2018

Reviews:

Related manuals for Sportsman Touring 570 EPS 2018

Brands by name

Popular brands