Polaris Sportsman Touring 570 EPS 2018 Owner'S Manual Download Page 64 | Manualshive

Page: 64 / 176

background image

SAFE OPERATION PRACTICES

1. Visit the Recreational Off-Highway Vehicle Association web site and take the

free on-line training course. Complete the recommended safety training
before operating this vehicle. Visit www.rohva.org or call 866-267-2751.

2. Do not allow anyone under 16 years of age or without a valid driver’s license

to operate this vehicle.

3. Never carry a passenger on this vehicle.

4. Engine exhaust fumes are poisonous. Never start the engine or let it run in

an enclosed area.

5. Never operate with accessories not approved by POLARIS for use on this

vehicle.

6. Operate this vehicle off-road only. Never operate this vehicle on any public

street, road or highway, including dirt and gravel roads (unless designated for
off-highway use).

7. Use caution and drive at reduced speeds in conditions of reduced visibility

such as fog, rain and darkness. Clean headlights frequently and replace
burned out headlamps promptly.

8. Always operate at a speed that's appropriate for the terrain, the visibility and

operating conditions and your skills and experience. Never operate at
excessive speeds. Never attempt wheelies, jumps, or other stunts. Keep
both hands on the steering wheel during operation.

9. Never consume alcohol or drugs before or while operating this vehicle.

10. Always use the size and type of tires specified for your vehicle. Always

maintain proper tire pressure.

11. Never operate a damaged vehicle. After any rollover or accident, have a

qualified service dealer inspect the entire machine for possible damage.

12. Never operate the vehicle on a frozen body of water unless you have first

verified that the ice is sufficiently thick to support the weight and moving force
of the vehicle, you and your cargo, together with any other vehicles in your
party.

13. Do not touch hot exhaust system components. Always keep combustible

materials away from the exhaust system.

14. Always remove the ignition key when the vehicle is not in use to prevent

unauthorized use.

TRAIL ETIQUETTE

Always practice good etiquette when riding. Allow a safe distance between your
vehicle and other vehicles operating in the same area. Communicate to
oncoming operators by signaling the number of vehicles in your group. When
stopping, move your vehicle to the edge of the trail as far as possible to allow
others to pass safely.

62

«
...
62
63
64
65
66
...
»

Summary of Contents for Sportsman Touring 570 EPS 2018

















































































































































































Reviews:

No comments

Related manuals for Sportsman Touring 570 EPS 2018

Brand: Baja motorsports Pages: 50

Brand: YTL Pages: 14

Brand: Cushman Pages: 158

Vinson LT-A500F

Brand: Suzuki Pages: 350

65 TREE Transplanter

Brand: Dakota Pages: 16

Outlander 500 2008

Brand: Can-Am Pages: 152

Tugger train Autarkic E Frame

Brand: Still Pages: 144

Brand: Texas Pages: 7

Brand: Toro Pages: 32

Brand: Coleman Powersports Pages: 38

Brand: U-Line Pages: 8

Viking YXM70VPXH 2016

Brand: Yamaha Pages: 172

Challenger 150UTV-X

Brand: TrailMaster Pages: 18

Brand: Ground Control Pages: 19

Brand: DETAIL K2 Pages: 38

Brand: DETAIL K2 Pages: 40

Brand: DETAIL K2 Pages: 38

Brand: DETAIL K2 Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands