Polaris Sportsman Touring 570 EPS 2018 Owner'S Manual Download Page 35 | Manualshive

Page: 35 / 176

background image

PARKING BRAKE

LOCKING THE PARKING BRAKE

1. Place the transmission in PARK.

2. Squeeze and release the brake

lever

q

two or three times, then

squeeze and hold.

3. Push the parking brake lock

w

forward to engage the lock.

4. Release the brake lever.

5. To release the parking brake lock,

squeeze and release the brake
lever. It will return to its unlocked
position.

WARNING

Operating the ATV while the parking brake is engaged could result in an

accident or fire. Always check to be sure the parking brake is disengaged

before operating.

The parking brake may relax if left on for a long period of time. Always block the
wheels to prevent rolling. Always block the wheels on the downhill side of the
ATV if leaving it parked on a hill. Another option is to park the ATV in a sidehill
position. Never depend on the parking brake alone if the ATV is parked on a hill.
Always block the wheels to prevent rolling.

33

FEATURES AND CONTROLS

«
...
33
34
35
36
37
...
»

Summary of Contents for Sportsman Touring 570 EPS 2018

















































































































































































Reviews:

No comments

Related manuals for Sportsman Touring 570 EPS 2018

Brand: MANCO Pages: 57

Brand: MANCO Pages: 57

Brand: Moni Pages: 27

GOOSENECK LIVESTOCK

Brand: Wilson Trailer Pages: 80

Brand: Madill Pages: 45

Brand: TRILECTRON Pages: 7

Brand: allen Pages: 62

Brand: Bad Boy Pages: 143

Brand: Landoll Pages: 78

Brand: Kellfri Pages: 12

Brand: CRG Pages: 9

GRIZZLY YFM70GPXJ 2017

Brand: Yamaha Pages: 176

Workman HD Series

Brand: Toro Pages: 318

Brand: Suzuki Pages: 248

Brand: AUSA Pages: 155

2009 LT-A750XK9

Brand: Suzuki Pages: 711

Brand: Segway Pages: 407

Brand: Ski-Doo Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands