Polaris Sportsman Touring 570 EPS 2018 Owner'S Manual Download Page 27

Page: 27 / 176

TIRE PRESSURE/LOAD WARNING (X2)

WARNING

Improper tire pressure or overloading can cause loss of control. Loss of control
can result in severe injury or death.

• Cold tire pressure:

Front: 7.0 psi (48.3 kPa)

Rear: 7.0 psi (48.3 kPa)

• Maximum weight capacity: 705 lbs. (320 kg)
• NEVER exceed 50 MPH (80 km/h) when rear cargo loads are above 75 lbs.

(34 kg) and/or front cargo loads are above 37 lbs. (17 kg).

• NEVER exceed 50 MPH (80 km/h) while carrying a passenger.
• NEVER exceed 10 MPH (16 km/h) when rear cargo loads are above 200 lbs.

(91 kg) and/or front cargo loads are 90 lbs. (41 kg).

• Lug nut torque values:

Steel rims 27 ft-lbs. (37 Nm)

Aluminum rims 30 ft-lbs. (41 Nm) + 1/4 Turn

CLUTCH COVER WARNING

WARNING

• Moving parts hazard under belt-clutch guard. To prevent serious injury, do not

operate vehicle with guard removed.

• Do not modify engine or clutch. Doing so can cause part failure, possible

imbalance, and excessive engine RPM, which can result in serious injury or
death.

HITCH CAPACITY LABEL (570/570 EPS/2X4/UTILITY
EDITION)

TRAILER MAX WEIGHT: 1225 LBS. (557 KG) ON LEVEL GROUND

HITCH MAX. VERTICAL WEIGHT: 120 LBS. (55 KG)

HITCH CAPACITY LABEL (570 SP)

TRAILER MAX WEIGHT:

1500 LBS. (682 KG) ON LEVEL GROUND)

850 LBS. (386 KG) UP TO 15° GRADE

HITCH MAX. VERTICAL WEIGHT: 150 LBS. (68 KG)

SAFETY

Summary of Contents for Sportsman Touring 570 EPS 2018

















































































































































































Search results

Summary of Contents for Sportsman Touring 570 EPS 2018

Reviews:

Related manuals for Sportsman Touring 570 EPS 2018

Brands by name

Popular brands

Polaris Sportsman Touring 570 EPS 2018, Owner'S Manual

Search results

Summary of Contents for Sportsman Touring 570 EPS 2018

Reviews:

Related manuals for Sportsman Touring 570 EPS 2018

Brands by name

Popular brands