Polaris Light Utility Hauler 6x6 Owner'S Manual Download

Page: 31 / 116

SAFETY

Operator Safety

POTENTIAL HAZARD
Operating this vehicle with improper tires or with improper or

uneven tire pressure.
WHAT CAN HAPPEN
Use of improper tires, or operation of the vehicle with improper or

uneven tire pressure, could cause loss of control or accident.
HOW TO AVOID THE HAZARD
Always use the size and type of tires specified in the owner’s

manual Supplement for the vehicle.
Always maintain proper tire pressure.

POTENTIAL HAZARD
Operating the vehicle with improper modifications.
WHAT CAN HAPPEN
Improper installation of accessories or modification of the

vehicle may cause changes in handling, which could lead to

an accident.
HOW TO AVOID THE HAZARD
Never modify the LUH 6x6 through improper installation or

use of accessories. All parts and accessories added to the

vehicle must be genuine Polaris Industries Inc. or equivalent

components designed for use on this vehicle and should be

installed and used according to approved instructions. See

your authorized Polaris dealer for more information.

WARNING

Summary of Contents for Light Utility Hauler 6x6





















































































































Search results

Summary of Contents for Light Utility Hauler 6x6

Reviews:

Related manuals for Light Utility Hauler 6x6

Brands by name

Popular brands

Polaris Light Utility Hauler 6x6, Owner'S Manual

Search results

Summary of Contents for Light Utility Hauler 6x6

Reviews:

Related manuals for Light Utility Hauler 6x6

Brands by name

Popular brands