Polaris Light Utility Hauler 6x6 Owner'S Manual Download Page 50

Page: 50 / 116

OPERATION

Hauling Cargo

Your LUH 6x6 has been designed to carry or tow a certain amount of

load. Always read and understand the load distribution warnings listed

on the warning labels. Never exceed the following weights.

Maximum Capacities

(Level Ground)

Front Rack

Cargo

Cargo Bed

LUH 6x6 - 890 lbs.

(404 kg)

75 lbs. (34 kg)

800 lbs. (363 kg)

Improper loading of the front rack can obstruct the headlight beam,

reducing night visibility. Do not obstruct the headlight beam with

cargo.

Maximum Towing Capacities (Level Ground)

Maximum towing load weight is 1500 lbs. (681 kg) on level ground

only and 850 lbs. (386 kg) on a grade up to 15

Maximum vertical hitch weight is 150 lbs. (68 kg).
Maximum grade while trailer towing is 15

. Do not tow any trailer on

a grade steeper than 15

Overloading the vehicle or carrying or towing cargo improperly can

alter vehicle handling and may cause loss of control or brake

instability.

Never exceed the stated load capacity for this vehicle.

Do not obstruct the headlight when loading the front rack.

Cargo should be properly distributed and carried as low and for-

ward in the cargo bed as possible.

Reduce speed and allow a greater distance for braking.

Use extreme caution when applying brakes with a loaded vehicle.

Avoid terrain or situations that may require backing downhill.

Always attach the tow load to the hitch point.

Vehicle should never exceed 10 mph (16 kph) while towing a load

on a level grass surface. Vehicle speed should never exceed 5

mph (8 kph) when towing loads in rough terrain, while cornering,

or while ascending or descending a hill.

WARNING

Summary of Contents for Light Utility Hauler 6x6





















































































































Search results

Summary of Contents for Light Utility Hauler 6x6

Reviews:

Related manuals for Light Utility Hauler 6x6

Brands by name

Popular brands

Polaris Light Utility Hauler 6x6, Owner'S Manual

Search results

Summary of Contents for Light Utility Hauler 6x6

Reviews:

Related manuals for Light Utility Hauler 6x6

Brands by name

Popular brands