Polaris 2x4 2008 Owner'S Manual Download

Page: 10 / 124

SAFETY

Operator Safety

Read and understand all warnings, cautions

and operating procedures in this manual and

on the safety labels before operating this

vehicle.
Never operate this vehicle without proper

instruction.

Take a training course.

Beginners

should receive training from a certified

instructor. Contact an authorized Polaris

dealer or visit the Polaris web site at

www.polarisindustries.com.
Never permit others to operate this vehicle unless they have read and under-

stand this manual and all product labels, and have completed a certified safety

training course.

Never carry a passenger. The purpose of the

long seat is to allow the operator to shift

position as needed during operation. It is not

intended for carrying passengers.

Never allow anyone under 16 years of age to

operate this vehicle.

WARNING

Serious injury or death can result if you do not follow the instructions and pro-

cedures listed here and throughout this manual.

Summary of Contents for 2x4 2008





























































































































Search results

Summary of Contents for 2x4 2008

Reviews:

Related manuals for 2x4 2008

Brands by name

Popular brands

Polaris 2x4 2008, Owner'S Manual

Search results

Summary of Contents for 2x4 2008

Reviews:

Related manuals for 2x4 2008

Brands by name

Popular brands