Polaris 2x4 2008 Owner'S Manual Download

Page: 77 / 124

MAINTENANCE

Tires

Refer to the specifications section beginning on page 110 for recom-

mended tire type, size and pressure.

Tire Tread Depth

Always replace tires

when tread depth is

worn to 1/8" (3 mm)

or less.

Front Wheel Hub Tightening

Front wheel bearing tightness and spindle nut retention are critical com-

ponent operations. All service must be performed by your authorized

Polaris dealer.

WARNING

Operating your vehicle with worn tires, improperly inflated tires, non-standard

tires or improperly installed tires will affect vehicle handling and could cause

an accident resulting in serious injury or death.
Maintain proper tire pressure as described on the decal on your vehicle and

in the owner's manual.
Always use original equipment size and type when replacing tires.
Make sure the wheels are installed properly.
Always replace tires when the tread depth measures 1/8" (3 mm) or less.

1/8" (3 mm)

Summary of Contents for 2x4 2008





























































































































Search results

Summary of Contents for 2x4 2008

Reviews:

Related manuals for 2x4 2008

Brands by name

Popular brands

Polaris 2x4 2008, Owner'S Manual

Search results

Summary of Contents for 2x4 2008

Reviews:

Related manuals for 2x4 2008

Brands by name

Popular brands