Polaris 2x4 2008 Owner'S Manual Download

Page: 9 / 124

SAFETY

Operator Safety

Safety Training

When you purchased your new Polaris vehicle, your dealer offered a

hands-on safety training course. You were also provided with printed

materials that explain safe operating procedures. Review this informa-

tion on a regular basis.
If you purchased your vehicle from a party other than a Polaris dealer,

please request free safety training from any authorized Polaris dealer.

Age Restrictions

This vehicle is an ADULT VEHICLE ONLY. Operation is prohibited

for anyone under 16 years of age.

Equipment Modifications

The warranty on your Polaris vehicle may be terminated if any equip-

ment has been added, or if any modifications have been made, that

increase speed or power.

NOTE:

The addition of certain accessories, including (but not limited to) mow-

ers, blades, tires, sprayers and large racks may change vehicle han-

dling. Use only Polaris-approved accessories. Know their function and

effect on the vehicle.

WARNING

Failure to follow the warnings in this manual can result in serious injury or

death. This vehicle is not a toy and can be hazardous to operate. A collision

or rollover can occur quickly, even during routine maneuvers, if you fail to

take proper precautions.
Read and understand your owner's manual and all warnings before operating

this vehicle.

Summary of Contents for 2x4 2008





























































































































Search results

Summary of Contents for 2x4 2008

Reviews:

Related manuals for 2x4 2008

Brands by name

Popular brands

Polaris 2x4 2008, Owner'S Manual

Search results

Summary of Contents for 2x4 2008

Reviews:

Related manuals for 2x4 2008

Brands by name

Popular brands