Polaris 2x4 2008 Owner'S Manual Download

Page: 33 / 124

FEATURES AND CONTROLS

Instrument Cluster

Rider Information Center

The rider information center is located in the instrument cluster. All seg-

ments will light up for 3 seconds at start-up.
1.

Gear Indicator -

This

indicator displays gear

shifter position.

N = Neutral (Green)

R = Reverse (Amber)

Engine Hour Display

Indicator

Speedometer

Odometer/Tripmeter/

Hour Meter

Modes

Use the reverse override/mode

button to toggle through the 3

standard modes.

NOTE:

If using the mode button to program the rider information center, or to

toggle through the options, the transmission cannot be in reverse.

Odometer

The odometer records the distance traveled by the vehicle.

Trip Meter

The trip meter records the distance traveled by the vehicle on each trip if

it's reset before each trip. To reset the trip meter, toggle to the trip meter

mode. Press and hold the mode button until the display changes to 0.
In the Rider Information Center, the trip meter display contains a deci-

mal point, but the odometer displays without a decimal point.

Hour Meter

This mode logs the total hours the engine has been in operation.

Summary of Contents for 2x4 2008





























































































































Search results

Summary of Contents for 2x4 2008

Reviews:

Related manuals for 2x4 2008

Brands by name

Popular brands

Polaris 2x4 2008, Owner'S Manual

Search results

Summary of Contents for 2x4 2008

Reviews:

Related manuals for 2x4 2008

Brands by name

Popular brands