Polaris 2010 Breeze Owner'S Manual Download Page 50

Page: 50 / 87

OPERATION

Driving on a Sidehill (Sidehilling)

Driving on a sidehill is not

recommended. Improper pro-
cedure could cause loss of

control or overturn. Avoid

crossing the side of any hill

unless absolutely necessary.
If crossing a hill is

unavoid-

able

, follow these precau-

tions:
1. Drive slowly and use

extreme caution.

2. If the vehicle begins to

overturn, or if it feels as if

it may overturn,

immediately

turn downhill.

3. Avoid obstacles and changes in terrain that may lower or raise one

side of the vehicle or cause the vehicle to slide.

4. If the vehicle begins to slide downhill, immediately turn downhill to

stop the slide, or stop the vehicle and maneuver slowly and care-

fully until the vehicle can be driven straight downhill.

Summary of Contents for 2010 Breeze
























































































Search results

Summary of Contents for 2010 Breeze

Reviews:

Related manuals for 2010 Breeze

Brands by name

Popular brands

Polaris 2010 Breeze, Owner'S Manual

Search results

Summary of Contents for 2010 Breeze

Reviews:

Related manuals for 2010 Breeze

Brands by name

Popular brands